![[Upgraded Version] Dual QC3.0 Cigarette Lighter Socket Splitter, CHGeek 250W Waterproof 12V Dual USB Charger Power Adapter Outlet with Aluminum Dual USB Ports and LED Display for Car Boat Marine,etc](https://m.media-amazon.com/images/I/71hB-1-qDTL.__AC_SX300_SY300_QL70_ML2_.jpg)
![[Upgraded Version] Dual QC3.0 Cigarette Lighter Socket Splitter, CHGeek 250W Waterproof 12V Dual USB Charger Power Adapter Outlet with Aluminum Dual USB Ports and LED Display for Car Boat Marine,etc](https://m.media-amazon.com/images/I/510be1eRdML._SS75_.jpg)
This is installed in a Little Guy Max teardrop trailer, next to the light switches which provide power from a battery charged from a set of solar panels This made it easy to wire, I used "Self-Stripping Quick Splice" connectors, which can be seen in the picture, to the existing wires to connect to the outlet switch wiring. It was very easy to install and provides both off-the-grid USB and 12V accessory while the voltage display provides both an indication that the power switch is on as well as battery level. The use of the plastic retaining nuts as well as the supplied screws make the adapter very solid.
The only problem I had is that this is installed on a half inch thick panel, and the power switch does not reach through it which means that the plastic retaining nut cannot be used on the back. The USB and 12V accessory adapters are both much longer and the retaining nuts work fine from the back of the panel. To address this I drilled the three 1-1/8" holes, but for the power switch I created a ledge or shoulder on the front of the hole, wide enough to fit the diameter of the retaining nut, and deep enough so that the retaining nut would sit flush with the front panel. This shoulder is really just the start of another hole, about 1-1/2" in diameter, but only about 1/8" deep so that the rest of the power switch would fit tightly in the rest of the 1-1/8" hole.
In hindsight it would have been easier to drill the wide, retainer nut diameter sized, hole instead of just a shoulder. I like that the barrel of the power switch is tightly held by the 1-1/8" hole, but it was a bit difficult to build the shoulder.
Videos for similar products
Compare with similar items
This Item ![[Upgraded Version] Dual QC3.0 Cigarette Lighter Socket Splitter, CHGeek 250W Waterproof 12V Dual USB Charger Power Adapter Outlet with Aluminum Dual USB Ports and LED Display for Car Boat Marine,etc](https://m.media-amazon.com/images/I/510be1eRdML._AC_.jpg) [Upgraded Version] Dual QC3.0 Cigarette Lighter Socket Splitter, CHGeek 250W Waterproof 12V Dual USB Charger Power Adapter Outlet with Aluminum Dual USB Ports and LED Display for Car Boat Marine,etc |  |  |  |  |  | |
| Price | Currently unavailable. | $16.97 | $16.79 | $20.99 | $16.89 | $15.99 |
| Delivery | — | Get it as soon as Saturday, Jun 8 | Get it as soon as Saturday, Jun 8 | Get it as soon as Saturday, Jun 8 | Get it as soon as Saturday, Jun 8 | Get it as soon as Monday, Jun 10 |
| Customer Ratings | ||||||
| Easy to install | ||||||
| Value for money | ||||||
| Quality of material | ||||||
| Sold By | — | Linkstyle | AotuojingDirect | AotuojingDirect | Kohree | AotuojingDirect |
| connector type | USB | Usb | QC3.0 USB-A | USB | usb | USB |
| number of usb ports | 2 | 2 | 3 | 3 | 2 | 2 |
| compatible devices | Smartphones, Dashcams, Tablets | GPS | Phone, GPS, Dash Cam, SatNav, Seat Heater, Cooler Box, Handheld Vacuum Cleaner, Drone, FM Transmitter, Refrigerator, LED Light, Vacuum Cleaner, Hot water kettle, Rice Cooker, Inflator, Radar Detector, Car Fan, etc, Tablets, Smart Phones, iPhone 14/14 Pro Max/13/13 Pro Max/12/12 Pro Max/11/Pro/Max/iPhone X/XS/XR/8/8 Plus/SE(need other lightning to c cable for PD fast charging), Samsung Galaxy S21/S20/ S20 Ultra/S10/S9/S8/S7/S6/Plus/Note 10/10+/9/8/7/6/Edge/S6 Edge/S6 Edge+, Pixel 3/3a/2/1/XL,Nexus 6P/5X/9, LG G6/G5/G4/G3/V20, HTC 10, HTC One A9/M9, BLU G9 Pro, Motorola Moto Z4/Z4 Play/Z4 Force/Z3/Z3 Play, Blackberry Nexus 5X/ 6P, Nexus 5X/ 6P Huawei Mate 9/ Mate 10/ P10/ P20/ P20 Pro/ Mate RS, Xiaomi MI 6/ MIX 2/ MIX 2S Nokia 7/7 Plus/Nokia 8, Sony, Blackberry, HTC ect, Tablets, Smart Phones | Dashcams, Cameras, GPS, Radar Detectors, Cellular Phones | — | Dashcams, Monitors |
| input voltage | 24 volts | 24 volts | 12 volts | 12 volts of direct current | 24 volts | 12 volts |
| connector gender | Male-to-Male | Male-to-Male | Male-to-Male | Male-to-Male | Male-to-Male | Male-to-Male |
| power source | Corded Electric | Battery Powered | DC | Corded Electric | Battery Powered | DC |
| output voltage | 5 volts | — | 12 volts of direct current | 12 volts of direct current | 12 volts | 24 volts |
| current rating | 10 amps | — | 15 amps | 15 amps | 2.0 amps, 1.5 amps, 10.0 amps, 3.0 amps | 2.0 amps, 1.5 amps, 3.0 amps |
Product Description
About CHGeek
Focusing on in-vehicle electronic and home products, CHGeek contributes to fulfill the needs of majority of automotive users. CHGeek provides drivers with premium products through the pursuit of technology and strict quality control.
CHGeek 12V/24V Multi-Functional BelowDeck Panels Cigarette Lighter Socket Power Adapter Outlet
Dual QC3.0 USB Car Charger with LED Voltage Indicator On Off Switch
Specifications
Power Input: DC 12V-24V
USB Output Voltage: 5V
Output of each usb port : DC 3.6-6.5V/3A, 6.5V-9V/2A, 9V-12V/1.5A
MAX Power: When installed in a 12V device, the maximum output is 120W; when installed in a 24V device, the maximum output is 250W.
- The voltage ONLY can be shown when connecting the car charger to power and switching on the button.
|
|
|
|
|---|---|---|
Metal Dual Quick Charge 3.0 USB PortsGives the fastest possible charge to any compatible phone or tablet, charging a phone up to 80% in 35 minutes—up to 4x faster than standard chargers. Quick Charge 3.0 is 38% more efficient than the previous version. The USB car charger is made of Aluminum alloy with better heat dissipation, which has advantage of non-flammable, wear resistant and good stability. |
12/24 Volt Cigarette Lighter Socket12V/24V cigarette lighter sockets provide a total power of up to 120W(12V) / 250W(24V), enough for daily use of a variety of portable appliances in your vehicle. |
Toggle SwitchAdded switch function, conserves electricity and no need to worry about drain any power. |
|
|
|
|
|---|---|---|
Digital LED Display
Note: The voltage ONLY can be read after connecting to power and switch on the button. |
Choose by yourselfCan be assembled on the blank panel according to your needs; Based on your demand, places the usb charger socket / cigarette lighter socket / toggle switch (or other compatible products) at the most appropriate panel position. |
Easy to installThe panel includes pre-wired harnesses for easy installation. |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
1:10
Click to play video
Customer Review: A must for an 05 Mustang.
Michael M.
Videos for this product
0:09
Click to play video
Customer Review: Great addition to RV Battery Box
Lizzie B.
Reviews with images
Easy to install, good functionality, very useful installation video
This is installed in a Little Guy Max teardrop trailer, next to the light switches which provide power from a battery charged from a set of solar panels This made it easy to wire, I used "Self-Stripping Quick Splice" connectors, which can be seen in the picture, to the existing wires to connect to the outlet switch wiring. It was very easy to install and provides both off-the-grid USB and 12V accessory while the voltage display provides both an indication that the power switch is on as well as battery level. The use of the plastic retaining nuts as well as the supplied screws make the adapter very solid.The only problem I had is that this is installed on a half inch thick panel, and the power switch does not reach through it which means that the plastic retaining nut cannot be used on the back. The USB and 12V accessory adapters are both much longer and the retaining nuts work fine from the back of the panel. To address this I drilled the three 1-1/8" holes, but for the power switch I created a ledge or shoulder on the front of the hole, wide enough to fit the diameter of the retaining nut, and deep enough so that the retaining nut would sit flush with the front panel. This shoulder is really just the start of another hole, about 1-1/2" in diameter, but only about 1/8" deep so that the rest of the power switch would fit tightly in the rest of the 1-1/8" hole. In hindsight it would have been easier to drill the wide, retainer nut diameter sized, hole instead of just a shoulder. I like that the barrel of the power switch is tightly held by the 1-1/8" hole, but it was a bit difficult to build the shoulder.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on November 17, 2019
The only problem I had is that this is installed on a half inch thick panel, and the power switch does not reach through it which means that the plastic retaining nut cannot be used on the back. The USB and 12V accessory adapters are both much longer and the retaining nuts work fine from the back of the panel. To address this I drilled the three 1-1/8" holes, but for the power switch I created a ledge or shoulder on the front of the hole, wide enough to fit the diameter of the retaining nut, and deep enough so that the retaining nut would sit flush with the front panel. This shoulder is really just the start of another hole, about 1-1/2" in diameter, but only about 1/8" deep so that the rest of the power switch would fit tightly in the rest of the 1-1/8" hole.
In hindsight it would have been easier to drill the wide, retainer nut diameter sized, hole instead of just a shoulder. I like that the barrel of the power switch is tightly held by the 1-1/8" hole, but it was a bit difficult to build the shoulder.
Easy to install, good functionality, very useful installation video
Reviewed in the United States on November 17, 2019
This is installed in a Little Guy Max teardrop trailer, next to the light switches which provide power from a battery charged from a set of solar panels This made it easy to wire, I used "Self-Stripping Quick Splice" connectors, which can be seen in the picture, to the existing wires to connect to the outlet switch wiring. It was very easy to install and provides both off-the-grid USB and 12V accessory while the voltage display provides both an indication that the power switch is on as well as battery level. The use of the plastic retaining nuts as well as the supplied screws make the adapter very solid.Reviewed in the United States on November 17, 2019
The only problem I had is that this is installed on a half inch thick panel, and the power switch does not reach through it which means that the plastic retaining nut cannot be used on the back. The USB and 12V accessory adapters are both much longer and the retaining nuts work fine from the back of the panel. To address this I drilled the three 1-1/8" holes, but for the power switch I created a ledge or shoulder on the front of the hole, wide enough to fit the diameter of the retaining nut, and deep enough so that the retaining nut would sit flush with the front panel. This shoulder is really just the start of another hole, about 1-1/2" in diameter, but only about 1/8" deep so that the rest of the power switch would fit tightly in the rest of the 1-1/8" hole.
In hindsight it would have been easier to drill the wide, retainer nut diameter sized, hole instead of just a shoulder. I like that the barrel of the power switch is tightly held by the 1-1/8" hole, but it was a bit difficult to build the shoulder.
Images in this review
Reviewed in the United States on October 6, 2019
1. the three features can be put in any order you like as long as you follow the wiring scheme.
2. the power switch is much shorter than the USB and 12v sockets - i have a very thick dash and the threads didn't reach the back of the drilled hole, so i super-glued the switch to the mounting plate. easy modification.
3. the nuts on the back of the sockets are plastic and can strip fairly easily - no need to over tighten.
4. i used a 1.25-inch hole saw, which is 1/8-inch smaller than specified in the instructional video, but that was a perfect size.
glad to have found this - quick shipping and what seems to me to be of good quality.
nice features in this combination, easy installation, completely pre-wired with good connections.
Reviewed in the United States on October 6, 2019
installed in our classic motorhome to replace the original 12v cigarette lighter. only a couple of minor hiccups and thoughts for other people considering the product.Reviewed in the United States on October 6, 2019
1. the three features can be put in any order you like as long as you follow the wiring scheme.
2. the power switch is much shorter than the USB and 12v sockets - i have a very thick dash and the threads didn't reach the back of the drilled hole, so i super-glued the switch to the mounting plate. easy modification.
3. the nuts on the back of the sockets are plastic and can strip fairly easily - no need to over tighten.
4. i used a 1.25-inch hole saw, which is 1/8-inch smaller than specified in the instructional video, but that was a perfect size.
glad to have found this - quick shipping and what seems to me to be of good quality.
Images in this review
Reviewed in the United States on July 9, 2019
Used this to have a power-port as well as a quick charge for my phone while working on My Kubota. I usually use Worktunes hearing protection that has blue tooth capability so I’m listening to music via my phone and needed a way to charge while on it for hours. The power cord that is shipped is short so I had to add length of wire to be able to connect it to the battery. Ground cord is also short but was long enough for me to attach it to the chassis under the instrument shroud. Overall seems decent quality. I highly recommend watching the install video because it took the guesswork out of what size holesaw to use. The prewired pigtails are good and it’s nice knowing there is a 10amp in-line fuse. Time will tell how waterproof it really is, especially when I’m clearing snow this winter.
Images in this review
Reviewed in the United States on June 7, 2019
Reviewed in the United States on June 24, 2019
Reviewed in the United States on November 1, 2019
