SKS Base-Side Bevel File Guide Multi Tool (Includes File)

Features

• Dial a precise angle from 0 degree to 5 degrees in 0.5 degree increments.
• It is recommended that you set the edge bevels with the file and then replace the file with 70-mm diamond stones to maintain the sharpness; if you always use the metal file, you will wear away the edge. The blue DMT or Red/Yellow Moonflex is a good choice, add the whole set if you are a racer.
• Bonus Benefit for this tool: If you don't know what base and side angles your ski/board are set to, this tool can help you find them. Before you start mark the metal edge with a sharpie, start the tool at the lowest angle and see if it removes the marking on your edge. Raise the angle step-wise and repeat until it removes the mark. That is your angle! Record the base/side angles for future reference.

*If this is not the "SKS Base-Side Bevel File Guide Multi Tool (Includes File)" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Jun 19, 2024 06:59 +08.