Product Description
The Axeon TF-series membrane elements offer high quality water for residential use. The TF-series will fit standard 2 x 12 RO membrane housings and have an indefinite shelf life. These are highest performing membrane elements that deliver consistent quality and performance. TF-series residential reverse osmosis polyamide-thin film composite membranes offer reliability, high performance and deliver consistent results for higher quality water. 98 percent nominal salt rejection. Improved system performance. Superior quality and cost savings. Individually vacuum tested. Axeon residential membranes operate as low as 50 psi and can yield up to 23 percent more water than other membranes at 65 psi. This Membrane Element is Tested and Certified by NSF International against NSF/ANSI Standard 58 for material requirements only. 150 gpd permeate flow rate. 98.00 percent stabilized salt rejection. 50 psig supplied pressure. 113 degree F maximum operating temperature. 150 psi maximum operating pressure. 2 gpm maximum feed flow rate. 2-11 pH Range, continuous operation. 1-13 pH Range - short term cleaning (30 minutes). 5 maximum SDI. Less than 1 maximum turbidity. 0 ppm chlorine tolerance. Thin film composite membrane type. Spiral wound configuration. Maximum temperature for continuous operations above pH10 is 95 degree F. 1-Year limited warranty.
Customers Who Bought This Item Also Bought
- Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4
- Anderson Metals 759106-04 1/4-Inch by 1/4-Inch Straight Needle Valve, Brass
- Pentek 158117 1/4" #10 Slim Line Clear Filter Housing
- FS-TFC Reverse Osmosis Membrane Housing 1812/2012 with 1/4" Quick-Connect Fittings for Ro Menbrane 50/75/100/150 GPD -White
- 5 Micron 10" x 2.5" Whole House Sediment Water Filter Replacement Cartridge Compatible with Any 10 inch RO Unit, Culligan P5, Aqua-Pure AP110, Dupont WFPFC5002, CFS110, RS14, WHKF-GD05, 4-Pack
- 2-1/2" Oil Pressure Gauge - Stainless Steel Case, Brass, 1/4" NPT, Lower Mount Connection, 0-200PSI
- DIGITEN Water Pressure Gauge Meter 0-1.6MPa 0-220psi 1/4" f Reverse Osmosis System Pump
- Pentek 244047 Mounting Bracket Kit for 1/4", 3/8" and 1/2" Housings
- Aquatec CDP 8800 water booster pump + Transformer 115V 1/4 & 3/8
- Reverse Osmosis Membrane Housing with 1/4" Quick-Connect Fittings
*If this is not the "
Axeon TF Series Polyamide Thin Film Composite Home Drinking Water Reverse Osmosis Membrane, 150 GPD " product you were looking for, you can check the other results by
clicking this link![](//ir-na.amazon-adsystem.com/e/ir?t=c-t-20&l=ur2&o=1)
.
Details were last updated on May 1, 2024 22:23 +08.