Features
- The Nano for arduino is a compact board similar to the UNO.The Nano for arduino is a small, complete, and breadboard-friendly board based on the Atmega328P . It has more or less the same functionality of the Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
- The Nano for arduino can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Each of the 14 digital pins on the Nano can be used as an input or output.They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50k Ohms. In addition, some pins have specialized functions.
- The Nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analog Reference( ) function. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality.
- The Nano for arduino has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers.Such as UART TTL (5V) serial communication and I2C (TWI) and SPI communication.
*If this is not the "
KOOKYE 5PCS Nano V3.0 ATMEGA328P Module CH340C 5V 16M Mini USB Micro-Controller Board for Arduino(Na" product you were looking for, you can check the other results by
clicking this link
.
Details were last updated on Jan 11, 2025 01:55 +08.
.
Details were last updated on Jan 11, 2025 01:55 +08.
