ARRIS C250 V2 250mm RC Quadcopter FPV Racing Drone RTF w/Flycolor 4-in-1 S-Tower + Radioli | |||||||||
|
Product Description
ARRIS C250 V2 is one more professional 250 fpv racing drone produced on the basis of the ARRIS C250. It has the advantage of simple structure and high strength. In the meanwhile, ARRIS C250 V2 adopts 4in1 30A tower for the first time, improve the performance of the drone much.
Advantages of the 4in1 30A Tower:
With the double layer design, you just need to plug the pins between electronic components. The layout is more concise, decrease the weight of the drone.
The power for flight controller and camera is provided by the BEC on the flight controller. The power for video transmitter is provided by battery. This improves the anti-interference of the video transmission.
The tower integrated the OSD.
The Tower structure design protects the ESC well during the flight. According to our experience, some of the ESC were damaged by the propeller rotation or tree brunch cut, and some of the ESC were damaged due to the broken of the motor arm during the crash when it installed on top of the motor arm. Sometimes, in order to protect the ESC, we added ESC cover to protect it. From this, the weight of the drone increased. For this tower, the esc integrated in the tower which installed in the middle of the quad frame, the ESCs can be protected quite well and make it looks better.
Package Includes:
1 x ARRIS C250 V2 Frame (ASIN: B01M9F8LE6)
1 x Radiolink AT9 + receiver (B0152VO92G)
1 x ARRIS 4S 1500mah Lipo Battery (B01I37E3BS)
4 x ARRIS X2205 2300KV Brushless Motors (B071XTFJCM)
1 x Flycolor S-Tower 4 in 1 ESC + F3 + OSD + PDB (B01MT8TWXI)
4 x ARRIS 5042 3-blade Propeller (B01N2QGH7J)
1 x ARRIS XAT700M FPV Mini Camera
1 x 5.8G FPV TX (ASIN: B01EH2YAH0) + Antenna
1 x Buzzer
Other equipment required (not included):
Battery Charger: Suggest Skyrc Imax B6AC V2 (B01MZ1ZZ7Z)
Goggle: Suggest Aomway Commander V1 (B0779Q3T6L)
Features
- Assembled RTF version, with Radiolink AT9 radio set and battery. Each drone has been well-calibrated and pre-flied.
- ARRIS C250 V2 uses flycolor 4in1 30A s-tower, which greatly reduced the wiring messing.
- The ARRIS C250 V2 adopts with the latest 5042 propeller, it has bigger windward area, well balance and strengthen root, and the efficiency is 10% higher than normal propeller.
- With the high performance ARRIS X2205 2300KV brushless motor, the ARRIS C250 has outstanding power.
- The camera angle is adjustable.
Customers Who Bought This Item Also Bought
- 5.8Ghz FPV Goggles, ARRIS VR-009 Video Headset 5.8G 40CH HD 3 Inch 16:9 Display Mini FPV Goggles for FPV Quadcopter Drones
- ARRIS 4S 14.8V 1500mAh 50C Graphene LiPo Battery Pack for FPV 250 RC Quadcopter Racing Drones, Such as Eachine 250, Kingkong 250, etc.
- GOLDBAT 4S 1500mAh 100C 14.8V LiPo Battery Pack with XT60 Plug for Heli Airplane Drone FPV Racing (2 Packs)
- EUDAX FPV Black Sponge Mat Landing Skid Pad Gear Anti-Vibration Shockproof Foam Sticky Tape for rc multirotor Quadcopter Racing Copter Drone Mini-Quad (60 Pcs)
- SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2
- Radiolink R9DS 2.4GHz RC Receiver 9/10CH SBUS/PWM Signal Long Range Control for AT9/AT9S/AT10II/AT10
- Ovonic 14.8V 1550mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY Parts
- iFlight M5 4 CW 4 CCW Flanged Nylon Insert Screw Nuts with 1pcs M5 Motor Screw Nuts Propeller Adapter Quick Release Wrench Tool for FPV DIY Quadcopter Racing Motor
- 16pcs DALPROP T5045C 5045 Props 5 Inch 3-Blades CW CCW Tri-Blade Propeller, Best Match for 200 210 230 250 FPV Racing Drone Quadcopter Frame Kit (Black Red Blue Green)
- Makerfire 2pcs 5.8GHz FPV Antenna Circular Polarized TX RX RHCP RPSMA for FPV Racing Drone Like QAV250
*If this is not the "ARRIS C250 V2 250mm RC Quadcopter FPV Racing Drone RTF w/Flycolor 4-in-1 S-Tower + Radiolink AT9 + 4" product you were looking for, you can check the other results by clicking this link