(6 Pcs) MCIGICM LM2596 Buck Converter, DC to DC 3.0-40V to 1.5-35V Step Down Power Supply

Product Description

MCIGICM LM2596 DC-DC Step-Down Buck Converter Power Module

Features:
Module property:Non-isolation buck
Rectification mode:Non-synchronous rectifier
Input voltage:3V-40V
Output voltage:1.3V-35V
Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)
Conversion efficiency:92%( highest )
Switching frequency:65KHz
Output ripple:30mV( maximum )
Load regulation:±0.5%
Voltage regulation:± 2.5%
Work temperature:-Minus 40 degrees - 85 degrees
Dimension:43mm*21mm*14mm(L*W*G)

Package:
6 * Lm2596 dc-dc buck converter step down module

Features

• Input: DC 3 V to 40 V . **NOTE** Input voltage must be 1.5 V higher than the output voltage, no boost.
• Output: DC 1.5 V to 35 V. Output current: 3A ( Max).
• All products are tested for stability, consistency and reliability. Ensure product excellence.
• Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)

*If this is not the "(6 Pcs) MCIGICM LM2596 Buck Converter, DC to DC 3.0-40V to 1.5-35V Step Down Power Supply High Effic" product you were looking for, you can check the other results by clicking this link.  Details were last updated on May 10, 2026 06:22 +08.