Valtcan Wrist Strap Grounding Tester Anti-Static ESD Test Ground Wires

Product Description

Valtcan Exact wrist strap tester verifies that resistance of your wrist strap is no lower than 800KΩ and no greater than 9MΩ.The proper resistance will provide an "OK" LED indication on the wrist strap tester. If either the RED "FAIL LOW" or Red "FAIL HIGH" LED's light, and the audible indicator sounds, then the wrist strap (or the ground cord) should be replaced. Requires 9V battery. Battery not included. Unscrew two screws on back of unit and insert 9v battery into compartment. Overview:

• The static strap function, Wrist Strap Tester can quickly and easily check the following:
• Test static strap and ground wire connection
• Test the impedance between skin and Static strap 
• Test the connection during anti-static access panels, cushion for connecting ground 
• Quickly and easily check ground systems at any place 
• Avoid static electricity to damage the product 
• Ensure staff safety 

Specifications:

• Instruction Impedance calibration: Buzzer 
• Low(red): R<800K ohm OFF 
• Good(green): 800K ohm less R less 9M ohm ON 
• High(red): R>9M ohm OFF 
• Outside size: 80(W)x40(H)x117(D)mm 
• Power source: 9V battery 
• The length of grounding wire: 2.5m 

Customers Who Bought This Item Also Bought

*If this is not the "Valtcan Wrist Strap Grounding Tester Anti-Static ESD Test Ground Wires" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Jun 30, 2024 10:13 +08.