[2-pack] LM2596s Buck Converter DC to DC Step-down Voltage Regulator Power Module 36V 24V | ||||||||||
|
Product Description
Product FeaturesParameters:
Input Voltage: DC 4-40V, error ±0.1V( note: digital display dose not work when input voltage is under 4v)
Output Voltage: DC 1.25V - 37V
Output Current: 3A(MAX) It is recommended to use under 2A (NOTE: When using high power, add a heat sink to the power supply chip)
Size: 6.6x3.9x1.8CM
Weight: 22g
Fuction:
Built in over-temperature protection function
Built in current limit function
Built in output short-circuit protection function
How to use
1.Press the button in a short time( 1 second) so that "in" LED lighted, the voltmeter shows the value of input voltage
2.Press the button in a short time( 1 second) again so that "out" LED lighted, the voltmeter shows the value of output voltage
3.Rotate the top screw of potentiometer clockwise to boost the value of the output voltage, anti clockwise to reduce it.
4.long press the button between 1 and 4 seconds to turn off the voltmeter.
How to adjust accuracy of input/output voltage
(for the person who need a highly accurate value of number)
1.long press the button for more than 4 seconds, then release, voltmeter and "in" LED flash in synchronization entering into the input voltage calibration mode.
2.Press the button in a short time( 1 second) to adjust the value(range from -0.5~0.5v, positive means to rises units, negative means to minus units)( Due to a unit is less than 0.1V, so you have to continuously press 1 to 5 times to see the voltmeter change 0.1V)
3.long press the button for more than 2 seconds and then release to enter the output voltage calibration mode.
4.After calibration, long press the button for more than 2 seconds all parameters will be saved automatically and back to the voltage display.
Customers Who Bought This Item Also Bought
- Noctua NF-A4x20 FLX, Premium Quiet Fan, 3-Pin (40x20mm, Brown)
- Noctua NF-A6x25 FLX, 3-Pin Premium Cooling Fan (60mm, Brown)
- 6 AA Battery Holder With 2.1mm x 5.5mm Connector 9V Output 2 Pack by Corpco
- eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module (6 Pack)
- Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)
- DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case
- Zixtec 10 Pack LM2596 DC-DC Buck Converter Step Down Module Power Supply DIP Output 1.25V-30V 3A
- Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm
- Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino
- Xiboya textile 3 Sets XT60 Parallel Battery Connector Cable for RC Multicopter Quadcopter
*If this is not the "[2-pack] LM2596s Buck Converter DC to DC Step-down Voltage Regulator Power Module 36V 24V 12V to 5V " product you were looking for, you can check the other results by clicking this link. Details were last updated on Aug 31, 2024 08:43 +08.