DUOMEIQI 16GB Kit (2 x 8GB) DDR3L / DDR3 1600MHz SODIMM RAM PC3L / PC3-12800 2Rx8 1.35V /1

Product Description

Please Kindly Note

In case the RAM cannot fit your computer, before purchase

please ensure the parameters such as the RAM model, RAM slot and

maximum memory of your computer. If not sure, we are glad to help you here.

Easy Installation

Please Turn off computer before installation. 

Step 1. Find out the the RAM cover of your computer, disassemble it with tools.

Step 2. Draw out the original RAM. Then install DUOMEIQI RAM with the connection figure side into the slot.

Step 3. Press down the DUOMEIQI memory, tighten the buckle.

Common Fault Diagnosis

1. Turn on computer, no display

----It mostly results from poor contact between memory and slot, you can try to wipe the connection figure with eraser. Please don't use Corrosives to wipe, such as ethyl alcohol. Memory and slot fault will cause no display too. If that's memory fault, the host loudspeaker will be buzzing（specific to Award BIOS)

2. Windows often boot into safe mode automatically

---- In general, that's because motherboard is incompatible with memory. Higher-frequency memory installed may result in this matter. You can try to slow the speed of data read in CMOS setting, if don't work, you need to change the memory.

3. Computer crash randomly

----Installing Different frequency RAMS will cause this problem. The difference of Memory speed cause timing difference, then result in crash. You can try to slow the speed of data read in CMOS setting. if don't work, you need to use same frequency RAMS. Motherboard incompatibility or poor contact with memory will bring about this situation too, but very rare.

Customers Who Bought This Item Also Bought

*If this is not the "DUOMEIQI 16GB Kit (2 x 8GB) DDR3L / DDR3 1600MHz SODIMM RAM PC3L / PC3-12800 2Rx8 1.35V /1.5V CL11 2" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Aug 31, 2024 20:20 +08.