Buck Converter 12v to 5v, DROK Voltage Regulator Board DC 6.5-36V Step Down to DC 1.2V-32V

Product Description

DROK 12V to 5V Converter

Parameters:
Input Voltage: 6.5-36V  (if the input voltage is lower than 6.5v, current accuracy will be inaccurate; LCD display panel will not show anything if it is lower than 5.5V)
Output Voltage: 1.2-32V, factory default output 5v
Output Current: can work stably at 3.5A for a long time, and can reach 4.5A under the heat dissipation (adjustable current limit is about 4.2-4.5A)
Output Power: 50W(natural heat dissipation, within 3.5A); 75W(enhanced heat dissipation)
Voltage Display: resolution is 0.05V, display range is 1.2-32V, accuracy is ±0.1V
Current Display: resolution is 00005A, display range is 0-4.5A, accuracy is ±0.05A
Conversion Efficiency: about 94%
Working Current: about 30mA
Input Reverse Connection Protection: Yes
Output Anti-backflow: No (When charging the battery, you should electrify the module and then connect it to the battery, and make sure that the battery voltage is lower than the output voltage. If allowed, please connect output anode to the anti-backflow diode in series.)
Size: 70.5 * 48.4 * 28mm

Notes:
1. The input IN- can't short-circuit to the output OUT-, otherwise, the constant current function will not work.
2. Please ensure that the power of the power supply is larger than the power required by the output load. If the module is hot, please reduce the power usage.
3. Please read the instructions carefully before using it.

Package Included:
1 x Buck Converter 12v to 5v



*If this is not the "Buck Converter 12v to 5v, DROK Voltage Regulator Board DC 6.5-36V Step Down to DC 1.2V-32V Volt Tran" product you were looking for, you can check the other results by clicking this link.  Details were last updated on May 15, 2024 13:00 +08.