Vogurtime D2-5 Smart Car Kit Soldering Project Line Tracking Robot for Fun Educational Ele

Product Description

There is a 16mm wide black runway in the white field on the manual . This tracking car can drive along the black runway automatically. No matter how the runway is bent, the car can be driven automatically. You can also use the 1.5~2.0 cm black electrical tape directly on the ground to design the complex runway. It would be even more fun!

With English manual and all compomnents, it is very great for teaching electronics projects, learning electronics, or just training your solder skills

Please note that the soldering project needs basic electronics knowledge.

Install Steps 1＃Install circuit

1.1>. Solder the resistors, 8-pin IC holder, switch, potentiometers, transistors, electrolytic capacitors and the 5mm RED light-emitting diodes successively on the circuit board according to the identifiers on the circuit diagram and board.

1.2>. Pay attention to the direction of IC Socket. In addition to facilitate debugging, don't install IC LM393 yet.

1.3>. Install Mecanum wheel

1.4>. Install photoresistor

1.4>. Install photoresistor and white LED on PCB reverse.

1.5>. Install battery case.

1.6>. Test.

2＃Install mechanical parts:

2.1>. Install the four gaskets on the circuit board.

2.2>. Insert a steel shaft from the center hole of the wheel.

2.3>. Put a three-way sleeve into steel shaft, installed in place.

2.4>. Place a gear into the steel shaft in the center of the steel shaft.

2.5>. Put a three-axis sleeve into the end of the steel shaft.

2.6>. Finally, the two shafts on the steel shaft are fitted into the screw projections of the fixed washers.

2.7>. Install Motor.

3＃Power on, Test. Install LM393.

Well package and high quality customer service also help a lot.

There are 2 pack and 5 pack smart car kits options if you want to have more than 1 pack kit, that's a good budget. Scroll up and add it to cart now!

Features

• Gives Interesting Experience of Assembly - Every components and English instruction of the smart car kits are ready for you. Just build a line following car easily, which is great for hobbyists and learners.
• Electronic Knowledge the kits Involves - The solder practice kit involves the principle of mechanical structure, electronic, sensor, automatic control, and discipline knowledge. Which is great for students learning.
• Practice Soldering and Learning Electronics - The smart car kit is fun for soldering. It's also good for keeping up with soldering if you have not done it in a while. Why is the little car always tracking the black lines? The more you practice and thinking, the more your learning. Please Note, it may can be your 2nd or 3rd soldering kit. if you are totally ZERO experience in soldering electronics, maybe the kit is not a good choice for you.
• Working Voltage: 3V; Finished car size: 104*72*55mm; 2 pcs AA batteries are required (No battery included). You can design your own runway easily by using the black tape (1.5~2.0cm ) or black colored pen. If you have any other needs, please feel free to let us know, we’d love to hear from you!

Customers Who Bought This Item Also Bought

*If this is not the "Vogurtime D2-5 Smart Car Kit Soldering Project Line Tracking Robot for Fun Educational Electronic Le" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Jul 4, 2025 07:00 +08.