MakerHawk USB Power Meter, TC66 USB Tester Type C USB Voltage Meter and Current Tester, 0.

Product Description

Parameters:
Model: TC66-C
Screen display: 0.96 Inch Color IPS Display
Voltage measuring range: 0-30.0000 V
Voltage measurement resolution: 0.0001 V (0.1mV)
Current measuring range: 0-5.00000A
Current measurement resolution: 0.00001A (0.01mA)
Power supply voltage: 3.5-24 V
Screen resolution: 160 * 80
Capacity accumulation range：0-99999 mAh
Voltage measurement accuracy: ± (0.05% + 10 digits under 23 ℃)
Energy accumulation range: 0-99999mWh 999.99Wh
Current measurement accuracy: ± (0.1% + 20 digits, under 23 ℃)
Load impedance range: 1Ω-9999.9 Ω
Power measuring range: 0-150 W
Temperature measuring range: 0 ℃ ~ 80 ℃ / 32 ℉ ~ 176 F
Refresh rate: 2Hz
Working temperature range: 0 ~ 45 ℃ / 32 ℉ ~ 113 ℉
Screen auto off time: 0-9mins
Dimensions: 49mm x 22mm x 8mm
Product weight: about 8g (on package 22g)
Fast load recognition mode: QC2.0, QC3. 0, APPLE 2.4A / 2.1A / 1A / DCP, 0.5A, Android SAMSUNG

Introduction of the panel
A: K1 button, short press to toggle the values or enter the submenu, taking over the press function on some interface.
B: K2 button, long press and hold to enter or exit the menu, press briefly to notice changing the menu.
C: power supply button switch. When connected, you can use system power supply; when turned off, you can use isolated power supply. For high accuracy and low voltage measurement, you can switch to OUT and use micro port to power on.
D: Micro port, use to isolate power supply or connection with PC software.
 
Package Including
1 * TC66C USB Multimeter

Features

• TC66C adopts 0.96 inch LCD HD color IPS screen to display the charging status of the appliance in real time. Human-Computer Interaction Interface. The voltage,current,capacity,energy, power,equivalent impedance,temperature and other indicators are clear at a glance.
• Support mobile phone APP(Android+IOS) and PC software to connect and control, wireless connection control(Only for TC66C). Android version: currently only supports android 5.0 system and above. Apple version: currently only support IOS 8.0 and above.
• Fast load recognition mode: Support USB PD, QC2.0/3.0, Samsung AFC, Huawei FCP, Apple and other mainstream quick charge protocols, trigger 5V/9V/12V/20V and other quick charge voltage,making it convenient to test the performance of quick charge charger, data cables and other products.
• Supports Two-way current measurement, forward current and reverse current. 6-digit measurement resolution. Independent power supply, measurement from 0V, low voltage equipment detection necessary.
• Offline Data Storage: When the PC software or APP cannot be connected in real time to save the measurement data, the offline storage function can be used. The measured Voltage/Current data can be temporarily stored in the storage unit of the tester, and then the measurement data can be generated by the PC software or APP.

Customers Who Bought This Item Also Bought

*If this is not the "MakerHawk USB Power Meter, TC66 USB Tester Type C USB Voltage Meter and Current Tester, 0.96 Inch IP" product you were looking for, you can check the other results by clicking this link.  Details were last updated on Jan 23, 2025 13:39 +08.