eBoot 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Mod

Product Description

10 Pack lm2596 dc to dc buck converter 3.0-40v to 1.5-35v power supply step down module

Features:
Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost)
Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A

Instructions:
Connect it to an electrical power source (3 - 40 v). The input and output interface can not be reversed.
Adjust the swirl button on the blue potentiometer (normally clockwise rotation goes up the voltage and counterclockwise rotation makes the voltage decline).
Monitor the output voltage with multimeter to get the needed voltage.

Notes:
Keep it under 2.5 A and use the heat sink when working for long hours.

Features

• Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost)
• Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A
• Features: all use SANYO solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output
• Quantity: 10 pieces; Size: 45 x 20 x 14 mm (with potentiometer)
• Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)

Customers Who Bought This Item Also Bought

*If this is not the "eBoot 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module (10 Pa" product you were looking for, you can check the other results by clicking this link.  Details were last updated on May 9, 2026 15:34 +08.