KOOKYE Arduino Lilypad LEDs (10x Lilypad LED & Coin Cell Battery Holder) | |||||||
| |||||||
Product Description
Your flashing, chip-tune playing T-shirt is really cool at the party, but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you've even sewn a LilyPad slide switch in-line. Wouldn't it be nice if there was just a switch on the battery? Well, look no further.
This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it's not easy to accidentally turn off or on.
Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative) for sewing into your project. Additionally, we have strengthened the battery connector on this board in order to ensure that it doesn't accidentally pop off.
Lilypad Battery Holder
This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries.
This simple board holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points (two positive and two negative) for sewing or soldering into your project.
Alligator Clips Test Lead
Wire: 22-AWG copper with PVC insulation,
Length 20.5″ (0.5m),Test lead-1.6"(0.4m)
Color: red, black, yellow, green, white
Rating: hands free testing at 300V, 7Amp
Package Included:
10x Lilypad Coin Cell Battery Holder
10x Lilypad LED(Red/Blue)
5x Alligator Clips Test Lead (green,white,black,yellow,red)
Features
- Lilypad Battery Holder:Each holds a single coin battery (CR2032 or similar) is integrated On / Off Switch,easy for turning off to save batteries.
- Lilypad Battery Holder:4 Connection Points (two + and two negative) can apply to solder or conductive thread.It can used for E-textiles and wearable smart garment.
- Alligator Clips Test Lead: Length-20.5"(0.5m), Test lead-1.6"(0.4m).The clips soldered and stamping to the wires.
- Alligator Clips Test Lead Wire: 22-AWG copper with PVC insulation for hands free testing.
- Package included 10pcs Lilypad battery holder ,10pcs Lilypad LED,Test leader & 5 colors(green,white,black,yellow,red) for arduino
Customers Who Bought This Item Also Bought
- KOOKYE Arduino Lilypad LEDs (25x Lilypad LED)
- Adafruit Stainless Thin Conductive Thread - 2 Ply - 23 Meter/76 ft
- 4 Pack Copper Foil Tape with Conductive Adhesive for EMI Shielding, Slug Repellent, Paper Circuits, Electrical Repairs, Grounding(1/4inch)
- Bolsen Tech 20 PCS/LOT Lilypad Coin Cell Holder CR2032 Mount Module Lily Pad for Arduino Small Slide Switch Board
- LiCB CR2032 3V Lithium Battery(10-Pack)
- Lilypad Sewable Starter Kit for Arduino | Lilypad Main Board | 20m Conductive Thread |10x Lilypad LED | Lilypad Coin Cell Battery Holder | Lilypad Light Sensor (Lilypad Starter Kit)
- DiCUNO 450pcs(5 Colors x 90pcs) 5mm LED Light Emitting Diode Round Assorted Color White/Red/Yellow/Green/Blue Kit Box
- AMX3d Lilypad Arduino Color LEDs – Red, Green, Blue & White Jewel LED with Internal Resistor for Lilypad E-Textiles and Wearable Projects, Pack of 20
- 500pcs LED Diode Lights, KingSo 5 Colors×100pcs 5mm Light Emitting Diodes LED Assortment Kit Electronics Components, Diffused Round Light Bulb for Arduino, White Red Orange Green Blue
- Adafruit Stainless Thin Conductive Yarn/Thick Conductive Thread - 35 ft
*If this is not the "KOOKYE Arduino Lilypad LEDs (10x Lilypad LED & Coin Cell Battery Holder)" product you were looking for, you can check the other results by clicking this link
.
Details were last updated on Mar 26, 2024 11:31 +08.
